DÂY HÀN Supercored 81- K2

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ BẢO MINH VINA
khẩu và phân phối bởi:Địa chỉ: 122/6B,đường số 11,phường Trường Thọ,quận Thủ Đức,TP. HCM
VPGD: Số 10,đường số 2,phường Trường Thọ,quận Thủ Đức, TP. HCM
Hotline: 0778 055 078 – 0936 055 078 – 0282 241 2626
Email: baominhviva79@gmail.com 
Website:baominhvina.com 
Supercored 81-K2 Welding Position : 1G(PA) Diameter : 1.4mm (0.052in) Shielding Gas : 100%CO₂ Flow Rate : 20 ℓ /min Amp./ Volt. : 300A / 32V Stick-Out : 20~25mm (0.79~0.98in) Pre-Heat : R.T . Interpass Temp. : 150±15℃ (302±59℉) Polarity : DC(+) This information is provided solely for the purpose of confirming product conformance with applicable standards. The serviceability of a product or structure utilizing this type of information is and must be the sole responsibility of the builder/user. Many variables beyond the control of HYUNDAI WELDING CO., LTD. affect the results obtained in applying this type of information. These variables include, but are not limited to, welding procedure, shielding gas, plate chemistry and temperature, weldment design, fabrication methods and service requirements. Consumable Tensile Test CVN Impact Test J(ft∙lbs) Supercored 81-K2 YS Mpa (ksi) TS(MPa) Mpa (ksi) EL(%) -30℃ (-22℉) -60℃ (-76℉) 545 (79) 625 (91) 27.5 100 58 AWS A5.36 E81T1-C1A8-K2 ≥470(68) 550~690 (80~100) ≥ 19 ≥27 (20) at –60℃ Consumable C Si Mn P S Ni Supercored 81-K2 0.04 0.34 1.30 0.011 0.011 1.50 AWS A5.36 E81T1-C1A8-K2 ≤0.15 ≤0.80 0.5∼1.75 ≤0.03 ≤0.03 1.0∼2.0